CARTRIDGE FLUSH Print Head Cleaner

Cartridge Flush - Inkjet Cartridge Print Head Cleaner - Professional Series Head Cleaning Fluid for use with all popular inkjet printer and fax machine cartridges such as HP, EPSON, LEXMARK, CANON, DELL, KODAK, BROTHER, XEROX, BT and many others! Unblock your print heads - Improve your print quality now!

• Hewlett Packard 

• Dell

• Lexmark

• Canon

• Epson

• BT

• Brother

• Xerox

Can be used directly onto the Printhead with a CLEAN cloth or cotton bud

Can be used as a part of the refilling process

After using the fluid - leave to soak for 24 hours - before installing the printer cartridges.

Do you have Problems with Poor Print Quality?
Does your Printer have blocked/Clogged Printheads

This is a specialist Inkjet Cartridge Head Cleaning Solution which is compatible with Ink Cartridges from:

If an inkjet cartridge has been unused, left empty or stored for a long period of time, the nozzles can become clogged with dried ink . Nozzles and print heads are extremely delicate and sensitive and can be damaged easily if any material other than a specifically formulated solvent is used to clean them. JR Inkjet Cartridge FLUSH is a specifically formulated Ink Cartridge Head Cleaner which can resolve these issues without the need to either replace the cartridge - OR THE PRINTER!!!

For HP & Lexmark Ink Cartridges with Integrated Print Heads

Allow the print heads to soak in Cartridge Flush to refresh the print nozzles and help restore print quality for about 10 minutes (Overnight if severely clogged); then blot onto a paper towel that has been folded to 3 or 4 thicknesses. Repeat if necessary, until you see a clear blot of each of the colours that are in the cartridge. Cartridge FLUSH will loosen the dried ink and the capillary action of the paper towel will pull the dried ink solution through the print head and into the paper towel.

JR Inkjet Cartridge Flush offers a simple and cheap solution for cleaning print heads and priming print cartridges for refills.

There are several ways to utilize Cartridge Flush:

Some cartridges require the interior to be cleaned prior to refilling. To clean the interior of your cartridge: Inject up to 8ml of Cartridge FLUSH into the cartridge. Install your cartridge back into the printer and print 5 test pages.
Uneven printing, skipping, or no print at all may suggest clogged print nozzles. If a cartridge has been left empty or unused for an extended period of time, its nozzles become blocked with old dried ink. To soak the print head: Allow the print head to soak in 1/4" of print head cleaner for one hour. Dab the print head dry against a soft paper towel, then print 2-3 test pages from print test page.
To prepare a stored cartridge for printing: Apply a small amount of FLUSH onto a paper towel. Allow your cartridge's print head to rest on the saturated paper towel for no more than 2 minutes. Dab the print head dry against a soft paper towel, then print.
Prior to every third refill, inject 1/2 - 2ml of Cartridge and Print Head Cleaner into your cartridge. Doing so will prolong the sponge life and prevent it from collecting excess ink.

For EPSON Ink Cartridges

Firstly, remove the cartridges. To do this you have to request for a « cartridge replacement ». If this option is unavailable, switch the printer on, when the cartridge holder begins to move from side to side, cut the power (by removing the power cable for instance). GENTLY move the holder to its « cartridge replacement » position. Take out the cartridge & put a couple of drops of flush onto the contact pads in the printer - leave for 10 minutes - re-install the cartridges & do 2-3 cleaning cycles.

JR Inkjet Cartridge FLUSH Head Cleaner - 60ml